솔리드웍스 CSWP 시험 예제 7번

반응형

[원문]

Design this part in SolidWorks using Sheet Metal features


Unit system: MMGS (millimeter, gram, second)

Decimal places: 2

Part origin: Arbitrary

Part Material : Aluminum, 1060 Alloy

Material Density : 0.0027 g/mm^3

Sheet Metal Thickness : 1.2 mm

Inner Bend Radius : 1.00 mm

Hem Gap Distance : 1.00 mm


- Remove the round holes in the flanges of the part

- Create two symmetrical hems bent into the interior of the part as shown

- Using the parameters given in Question 4, measure the mass of the part


What is the mass of the part (grams)?

a) 105.20

b) 115.38

c) 124.11

d) 138.06


[Part 모델링]

솔리드웍스에서 판금 피처를 사용하여 이 파트를 설계하세요.


단위 시스템 : MMGS (mm, 그램, 초)

소수점 이하 자릿수 : 2

파트 원점 : 임의

파트 재질 : 알루미늄, 1060 합금

재질 밀도 : 0.0027 g/mm^3

판금 두께 : 1.20 mm

내부 굽힘 반경 : 1.00 mm

헴 갭 거리 : 1.00 mm


부품의 플랜지에 둥근 구멍을 제거 하세요.

그림과 같이 파트의 내부로 구부러진 두 개의 대칭 헴을 만듭니다.

문제 4에 주어진 파트를 사용하여 부품의 질량을 측정합니다.


부품의 질량을 측정하세요.


[문제]

부품의 전체질량(g)은 얼마인가?

a) 105.20

b) 115.38

c) 124.11

d) 138.06


정답은 아래에 있습니다.


반응형