솔리드웍스 CSWP 시험 예제 8번

반응형

[원문]

Design this part in SolidWorks using Sheet Metal features


Unit system: MMGS (millimeter, gram, second)

Decimal places: 2

Part origin: Arbitrary

Part Material : Alloy Steel

Material Density : 0.0077 g/mm^3

All holes through all unless shown otherwise

- Use the following parameters and equations which correspond to the dimensions labeled in the images :


A = 213 mm

B = 200 mm  

C = 170 mm

D = 130 mm

E = 41 mm

F = Hole Wizard Standard : Ansi Metric Counterbore

Type : Hex Bolt - ANSI B18.2.3.5M

Size : M8

Fit : Close

Through Hole Diameter : 15.00 mm

Counterbore Diameter : 30.00 mm

Counterbore Depth : 10.00 mm

End Condition : Through All

X = A/3

Y = B/3 + 10 mm


Hint #1 : The dimensions that are to be linked or updated and are variable will be labeled with letters.

            Any dimensions that are simple value changes from one stage to another will be circled in the images.

Hint #2 : To save the most time, make use of linked dimensional values and equations.


Measure the mass of the part.


What is the mass of the part (grams)?

a) 14139.65

b) 14298.56

c) 15118.41

d) 14207.34 


[Part 모델링]

솔리드웍스에서 이 파트를 설계하세요.


단위 시스템 : MMGS (mm, 그램, 초)

소수점 이하 자릿수 : 2

파트 원점 : 임의

파트 재질 : 합금강

재질 밀도 : 0.0077 g/mm^3

특별한 표시되지 않는 한 모든 구멍은 모두 관통합니다.

아래에 표시된 치수에 해당하는 다음 매개변수와 수식을 사용하세요.

A = 213 mm

B = 200 mm  

C = 170 mm

D = 130 mm

E = 41 mm

F = 구멍 가공 마법사 표준 : Ansi 미터법 카운터 보어

유형 : 육각 볼트 - ANSI B18.2.3.5M

크기 : M8

맞춤 : 닫기

관통 홀 직경 : 15.00 mm

카운터 보어 직경 : 30.00 mm

카운터 보어 깊이 : 10.00 mm

마침 조건 : 관통

X = A/3

Y = B/3 + 10 mm


힌트 #1 : 링크 또는 업데이트되는 가변적인 수식은 문자로 지정됩니다.

             한 단계에서 다른 단계로의 간단한 값 변경이 되는 모든 수식은 이미지에서 원으로 표시됩니다.

힌트 #2 : 가장 많은 시간을 절약하려면 연결된 치수 값과 수식을 사용하십시오.


부품의 질량을 측정하세요.


[문제]

부품의 전체질량(g)은 얼마인가?

a) 14139.65

b) 14298.56

c) 15118.41

d) 14207.34 


정답은 아래에 있습니다.


반응형